Preview site — orders are not processed, do not send funds.

One place for order history, saved payout details and a fixed rate on repeat directions. The same button signs you in and creates an account.

Continue with email

An account is the second step of every exchange. Signing in means you accept the user agreement and the privacy policy.

How-toBeginner · 6 min

How to receive a payout in India through UPI and IMPS

A desk with a phone, an open notebook and a laptop

Key takeaways

  • UPI points at a VPA or a mobile number, while IMPS and NEFT need an account number plus an 11-character IFSC.
  • Banks cap UPI per transfer and per day, so a larger payout often goes by IMPS or NEFT instead of one UPI credit.
  • The fifth character of an IFSC is the digit zero, and typing the letter O there is the most common reason a payout bounces.

An Indian bank account can be reached in three ways, and they fail in different places. UPI, IMPS and NEFT all end with rupees in the same account, but a stalled UPI payout and a stalled IMPS payout are fixed by asking different questions. This guide covers what each rail asks of you, which limits get hit first, and the one typo in an IFSC code that sends a payout into a manual check. If you only want the route and the fee, the page at /india/ has it.

What a VPA is and what it does not show

A VPA, or virtual payment address, looks like an email: a name, an at sign and the handle of a bank or app. It is a pointer to one bank account, nothing more. You can hold several VPAs on the same account, and switching from one payment app to another does not move your money, it only changes the pointer. When a sender types a VPA, the app asks the bank who owns it and displays a name before the payment goes. That display is the check we rely on: the name must be yours, because a payout to a relative's VPA is refused on a personal order. If you do not remember your own VPA, open the account page of your banking app, where it is usually listed under the profile or the linked accounts. One practical habit: before an important order, ask someone to send you a one-rupee test to the VPA you plan to quote. If the name that appears matches your ID, the VPA is safe to give. If the app shows a nickname or a shortened name, check with your bank what is registered, because the name on file is the name the payout will be compared against.

UPI, IMPS and NEFT in plain terms

UPI is the layer you see in the app. Under it, money still moves between bank accounts through the interbank network run by NPCI, and IMPS is the older rail that works from an account number and an IFSC code. IMPS runs at any hour, on any day, and posts within seconds when both banks behave. NEFT is the third option: since December 2019 it also settles around the clock, but in batches, so a credit can take from half an hour to a couple of hours. For an ordinary payout the difference is small. It becomes visible when the receiving bank is slow, because then you are chasing a reference number on one rail or a batch on another. If the app lets you pick, UPI is the shortest to type, and IMPS is the safer fallback for a big sum. A note on weekends: because none of these rails depends on branch hours, a Sunday payout is possible in principle. What differs is how quickly anyone answers if it stalls, since bank support often keeps shorter hours on Sundays and on national holidays such as the Diwali week.

The order matters more than it looks. Doing these two things in the wrong sequence is the difference between a locked rate and whatever the market gives you twenty minutes later.

Limits you will actually hit

The ceilings come from two places: the scheme and your own bank. Many banks start a new customer at a UPI daily ceiling near 100,000 rupees, and a lot of them let you raise it in the app. The IMPS scheme allows up to 500,000 rupees per transfer, though some banks set a lower figure by default. An order of several thousand dollars converts into more rupees than a default UPI day will take. The practical advice is dull but works: before you place a large order, open the limit screen in your banking app, look at the per-transfer and per-day numbers, and raise them if needed. Otherwise the payout may need to be split or switched to IMPS. Also remember that limits usually apply to what leaves an account, not to what arrives, so the receiving side rarely refuses a credit for its size alone. The ceilings matter mostly if you forward the rupees onward from the same app on the same day, because then the daily counter is already partly used.

RouteCostSettlementWho you trust
Bank cardshown in the orderdepends on the issuing bankExchanger and issuing bank
Bank transfershown in the orderfollows banking daysTwo banks and a compliance officer
P2P on an exchangeset by the sellerminutes to hoursA stranger and an escrow

The cooling period and the first-credit check

Two different delays get mixed up. The first one is a cooling period that some banks apply after you add a new payee: the first payment to that person can wait anywhere from half an hour to a day. It matters when you plan to forward the rupees right after our payout, say to a landlord or a relative. Add that payee a day earlier. The second delay is on the receiving side. A first large credit from a sender your bank has not seen, especially one it can tell is linked to crypto, can trigger a fraud filter. Often the bank releases it after a message in the app or a short call. Keep the order reference from our confirmation, because it is what your bank will want when it asks where the credit came from. If a credit is held, do not place a second order for the same funds and do not ask us to resend. The first payout was released from our side, and a duplicate would only stack a second delay on the first. Wait for the bank's answer, then tell us if it asks for something we can supply.

The IFSC typo and the paperwork

An IFSC has 11 characters. The first four letters name the bank, the fifth is always the digit zero, and the last six identify the branch. People read that fifth character as a capital O, type it that way, and the bank's validator either rejects the code or sends the payout to a repair queue. If you are typing by hand, make the fifth character a zero and copy the rest from the branch details in your app or from a cheque leaf. Paperwork follows the usual thresholds. The account holder name has to match the name on the order. When the spelling differs, the bank record is the reference, not the ID card. If the bank holds your name with initials, such as a single letter for the surname, use the bank's form and say so at the start, so the check compares like with like. A mismatch found after the payout is a longer story than one found before.

Try it on your amount
Rate 1 USDT = 1.00 USDFee 0.9%
Exchange USDT → USD

Questions

Is UPI faster than IMPS?
On the payment network itself both are seconds when everything is normal, because UPI settles through the same interbank infrastructure. The difference you notice comes from limits and from how the receiving bank treats the credit. For larger payouts IMPS is often the calmer choice.
Can I give my spouse's VPA instead of mine?
No. The VPA must resolve to an account in your own name, and the name shown by the bank is compared with the name on the order. A payout to someone else's account is refused, and the order is closed with a refund of the crypto to your wallet.
The payout was released but nothing arrived. What do I ask the bank?
Ask them to trace the credit using the reference or UTR number of the transfer. Some banks hold a credit for a review and release it hours later. We can confirm that the payout was sent, which is what the bank support will ask you to show.