Preview site — orders are not processed, do not send funds.

One place for order history, saved payout details and a fixed rate on repeat directions. The same button signs you in and creates an account.

Continue with email

An account is the second step of every exchange. Signing in means you accept the user agreement and the privacy policy.

MoneyBeginner · 7 min

Why the amount you receive differs from the one you counted

Euro banknotes and coins

Key takeaways

  • The gap between the sum you counted and the sum you receive is a chain of separate charges, and only some of them are ours.
  • Our fee sits inside the rate, so the rate line, not a separate fee row, is where our share appears.
  • To land on a target amount, work backwards from the "You receive" figure instead of adding a guess to the top.

You count 1,000 USDT, expect about 1,000 dollars, and the bank shows less. Nobody took it in one lump: the difference is several small cuts, each at a different step and each shown in a different place. Below is one 1,000 USDT sale followed through every step with exact arithmetic, so you can see where each number comes from and where to read it on the site.

The number in your head and the six steps behind it

Take 1,000 USDT held on an exchange that you want paid in US dollars to a bank account. In your head that is $1,000. Between the two stand six steps. The network fee of the sending side. The rate at the moment the order is created. Our margin inside that rate. The fee of the receiving bank or, for a crypto payout, of the payout network. Rounding at the end. And on a crypto payout, a final network fee. Not every sale meets all of them. A bank payout skips the last, while a crypto payout skips the bank. Knowing which apply to you is most of the work, so the next sections go through them in order. A useful habit is to write the six numbers on a line before you start, with a question mark next to each you cannot yet see. The unknowns sit on the outer steps: the exchange's own fee and the bank's. Ours is the one you can calculate in advance, to the cent, which makes it the easiest to blame and the least likely to surprise you. Most of the confusion we answer comes from the two numbers nobody had written down.

Step one: what leaves on the sending side

Your exchange charges a withdrawal fee, which is the network fee in different clothes. On TRC20 it is about $1, on ERC20 $4 to $14, on Bitcoin $1 to $6. Many exchanges subtract it from the sum you ask for, so withdrawing 1,000 USDT on TRC20 delivers about 999. Read the confirmation screen of the exchange, not ours, because only it knows. Then create the order for the amount that will actually arrive, 999 in our example. If you enter 1,000 and 999 comes, the order is calculated on what arrived and the figure you saw first is no longer valid. If you bought the USDT first, for example by card on an exchange, the same logic shifts one step earlier, because that purchase had its own price and fee. We see only what arrives at our address, so everything before that point belongs to the place the coins came from. The number to carry into our calculator is the one the exchange says will arrive, not the one you typed into its form.

The order matters more than it looks. Doing these two things in the wrong sequence is the difference between a locked rate and whatever the market gives you twenty minutes later.

Step two: the rate and the fee inside it

The calculator at the top of the pair page shows the rate for your direction, and that rate is held for 15 minutes after the order is created. Our fee for USDT to USD is 0.9 percent with a minimum of 100 USDT, and it is not a separate line: it is already inside the rate. With USDT at one dollar, the effective rate is 0.991 dollars per USDT. On 999 USDT that gives 999 times 0.991, which is 990.009. Our share is 999 minus 990.009, or $8.991. If the market moves and the 15 minutes pass before your coins arrive, the rate is recalculated and shown again before any payment. For a stable pair this changes cents, but for Bitcoin the same delay can change dollars. Where to look: the rate line sits directly below the calculator and shows the effective rate for the direction you picked. The limits, including the 100 USDT minimum for this pair, are in the pair details further down the page. The countdown on the order page shows how much of the 15 minutes remains. Open them in that order and the arithmetic above can be repeated with a pocket calculator in under a minute.

RouteCostSettlementWho you trust
Bank cardshown in the orderdepends on the issuing bankExchanger and issuing bank
Bank transfershown in the orderfollows banking daysTwo banks and a compliance officer
P2P on an exchangeset by the sellerminutes to hoursA stranger and an escrow

Step three: the payout side, which is not ours

We send a bank transfer or a card payment in your name, and we do not take a further fee on it. Your bank, though, may charge for an incoming transfer, or convert the currency at its own rate if the account is not in dollars. That charge is in its tariff and on its statement, not in ours. For the arithmetic, suppose it is $10; this is a placeholder, so check your bank. A payment requested after a bank cutoff leaves in the next processing window, which changes the day it arrives and not the sum. On a crypto payout the sum is reduced by the network fee of the chosen network, about $1 on TRC20 or $4 to $14 on ERC20, and the "You receive" line on the order page is the figure that already accounts for it. A card payout works the same way. We send to a Visa or Mastercard in your name, and the card issuer decides how to post it. Some issuers hold incoming transfers for a day or two, and some apply their own conversion if the card is in another currency. Check the statement, not the push notification. If the card is in dollars and the payout is in dollars, nothing converts.

Rounding, the full ledger, and working backwards

Fiat amounts are rounded to cents, so 990.009 appears as $990.01, a gain of a tenth of a cent. Crypto amounts follow the precision of the token. Now the full ledger. You counted 1,000. The exchange took 1, leaving 999. Our margin took 8.99, leaving $990.01. The bank took 10, leaving $980.01. The total difference is $19.99, which is 1.999 percent, and only $8.99 of it is ours. To receive exactly $1,000, divide by the rate: 1,000 over 0.991 is 1,009.08 USDT. Add the $1 the exchange will take and send about 1,010.09. If the final figure still looks wrong after the ledger above, send support the order number and a screenshot of the statement line. With those two items the difference can be taken apart in a few minutes, because every step on our side is recorded to the cent, and the part that is not ours is easy to point out. Most of the time the missing money turns out to be one of the first four items, in the order shown.

Try it on your amount
Rate 1 USDT = 1.00 USDFee 0.9%
Exchange USDT → USD

Questions

The calculator showed 990.01 but my bank statement says 980.01. Did you short me?
No. The $10 difference is the receiving bank's incoming-payment charge in this example. We can send you the payment reference of our transfer, and your bank can confirm what it deducted. The calculator figure is what leaves us, and charges after that point are outside our system.
Does the rate change between creating the order and paying?
Not during the 15-minute hold. After it expires, the rate is recalculated and shown to you before any payment goes out, so you can accept or cancel. For USDT to USD the movement is cents. For Bitcoin, which can shift by more than a percent in a quarter of an hour, send promptly.
Can I ask you to cover the fee so I get the full amount?
No, because the fee is how the service is paid, and it is already built into the rate. What you can do is calculate backwards. Take the sum you want to receive, divide by the effective rate, add what your sending exchange will deduct, and create the order for the result.